if option `set-proc-title' is no, then do nothing for proc title.
The reason has been explained long ago, see following:
We update redis to 2.8.8, then found there are some side effect when
redis always change the process title.
We run several slave instance on one computer, and all these salves
listen on unix socket only, then ps will show:
1 S redis 18036 1 0 80 0 - 56130 ep_pol 14:02 ? 00:00:31 /usr/sbin/redis-server *:0
1 S redis 23949 1 0 80 0 - 11074 ep_pol 15:41 ? 00:00:00 /usr/sbin/redis-server *:0
for redis 2.6 the output of ps is like following:
1 S redis 18036 1 0 80 0 - 56130 ep_pol 14:02 ? 00:00:31 /usr/sbin/redis-server /etc/redis/a.conf
1 S redis 23949 1 0 80 0 - 11074 ep_pol 15:41 ? 00:00:00 /usr/sbin/redis-server /etc/redis/b.conf
Later is more informational in our case. The situation
is worse when we manage the config and process running
state by salt. Salt check the process by running "ps |
grep SIG" (for Gentoo System) to check the running
state, where SIG is the string to search for when
looking for the service process with ps. Previously, we
define sig as "/usr/sbin/redis-server
/etc/redis/a.conf". Since the ps output is identical for
our case, so we have no way to check the state of
specified redis instance.
So, for our case, we prefer the old behavior, i.e, do
not change the process title for the main redis process.
Or add an option such as "set-proc-title [yes|no]" to
control this behavior.
Co-authored-by: Yossi Gottlieb <yossigo@gmail.com>
Co-authored-by: Oran Agra <oran@redislabs.com>
The line that said:
Note: you can disable saving completely by commenting out all "save" lines
was incorrect.
Also, note that the save values used in the default redis.conf file are different than the server's defaults, so this PR also addresses this and introduces a potential behavior change for some users.
* Adds ASYNC and SYNC arguments to SCRIPT FLUSH
* Adds SYNC argument to FLUSHDB and FLUSHALL
* Adds new config to control the default behavior of FLUSHDB, FLUSHALL and SCRIPT FLUASH.
the new behavior is as follows:
* FLUSH[ALL|DB],SCRIPT FLUSH: Determine sync or async according to the
value of lazyfree-lazy-user-flush.
* FLUSH[ALL|DB],SCRIPT FLUSH ASYNC: Always flushes the database in an async manner.
* FLUSH[ALL|DB],SCRIPT FLUSH SYNC: Always flushes the database in a sync manner.
Older arm64 Linux kernels have a bug that could lead to data corruption during
background save under the following scenario:
1) jemalloc uses MADV_FREE on a page,
2) jemalloc reuses and writes the page,
3) Redis forks the background save process, and
4) Linux performs page reclamation.
Under these conditions, Linux will reclaim the page wrongfully and the
background save process will read zeros when it tries to read the page.
The bug has been fixed in Linux with commit:
ff1712f953e27f0b0718762ec17d0adb15c9fd0b ("arm64: pgtable: Ensure dirty bit is
preserved across pte_wrprotect()")
This Commit adds an ignore-warnings config, when not found, redis will
print a warning and exit on startup (default behavior).
Co-authored-by: Oran Agra <oran@redislabs.com>
This adds a new `tls-client-cert-file` and `tls-client-key-file`
configuration directives which make it possible to use different
certificates for the TLS-server and TLS-client functions of Redis.
This is an optional directive. If it is not specified the `tls-cert-file`
and `tls-key-file` directives are used for TLS client functions as well.
Also, `utils/gen-test-certs.sh` now creates additional server-only and client-only certs and will skip intensive operations if target files already exist.
When loading an encoded payload we will at least do a shallow validation to
check that the size that's encoded in the payload matches the size of the
allocation.
This let's us later use this encoded size to make sure the various offsets
inside encoded payload don't reach outside the allocation, if they do, we'll
assert/panic, but at least we won't segfault or smear memory.
We can also do 'deep' validation which runs on all the records of the encoded
payload and validates that they don't contain invalid offsets. This lets us
detect corruptions early and reject a RESTORE command rather than accepting
it and asserting (crashing) later when accessing that payload via some command.
configuration:
- adding ACL flag skip-sanitize-payload
- adding config sanitize-dump-payload [yes/no/clients]
For now, we don't have a good way to ensure MIGRATE in cluster resharding isn't
being slowed down by these sanitation, so i'm setting the default value to `no`,
but later on it should be set to `clients` by default.
changes:
- changing rdbReportError not to `exit` in RESTORE command
- adding a new stat to be able to later check if cluster MIGRATE isn't being
slowed down by sanitation.
Fixes#7923.
This PR appropriates the special `&` symbol (because `@` and `*` are taken),
followed by a literal value or pattern for describing the Pub/Sub patterns that
an ACL user can interact with. It is similar to the existing key patterns
mechanism in function (additive) and implementation (copy-pasta). It also adds
the allchannels and resetchannels ACL keywords, naturally.
The default user is given allchannels permissions, whereas new users get
whatever is defined by the acl-pubsub-default configuration directive. For
backward compatibility in 6.2, the default of this directive is allchannels but
this is likely to be changed to resetchannels in the next major version for
stronger default security settings.
Unless allchannels is set for the user, channel access permissions are checked
as follows :
* Calls to both PUBLISH and SUBSCRIBE will fail unless a pattern matching the
argumentative channel name(s) exists for the user.
* Calls to PSUBSCRIBE will fail unless the pattern(s) provided as an argument
literally exist(s) in the user's list.
Such failures are logged to the ACL log.
Runtime changes to channel permissions for a user with existing subscribing
clients cause said clients to disconnect unless the new permissions permit the
connections to continue. Note, however, that PSUBSCRIBErs' patterns are matched
literally, so given the change bar:* -> b*, pattern subscribers to bar:* will be
disconnected.
Notes/questions:
* UNSUBSCRIBE, PUNSUBSCRIBE and PUBSUB remain unprotected due to lack of reasons
for touching them.
Fix: When oom-score-adj-values is provided in the config file after
oom-score-adj yes, it'll take an immediate action, before
readOOMScoreAdj was acquired, resulting in an error (out of range score
due to uninitialized value. delay the reaction the real call is made by
main().
Since the values are clamped to -1000..1000, and they're
applied as an offset from the value at startup (which may be -1000), we
need to allow the offsets to reach to +2000 so that a value of +1000 is
achievable in case the value at startup was -1000.
Adding an option for absolute values rather than relative ones.
* Configuration file default should now be "auto".
* Expose "process_supervised" as an info field.
* Log messages improvements (clarify required systemd config, report
auto-detected supervision mode, etc.)
* Set server.supervised properly, so it can take precedence of
"daemonize" configuration.
* Produce clear warning if systemd is detected/requested but executable
is compiled without support for it, instead of silently ignoring.
* Handle systemd notification error on startup, and turn off supervised
mode if it failed.
- Add ZDIFF and ZDIFFSTORE which work similarly to SDIFF and SDIFFSTORE
- Make sure the new WITHSCORES argument that was added for ZUNION isn't considered valid for ZUNIONSTORE
Co-authored-by: Oran Agra <oran@redislabs.com>
Background:
#3467 (redis 4.0.0), started ignoring ENOPROTOOPT, but did that only for
the default bind (in case bind config wasn't explicitly set).
#5598 (redis 5.0.3), added that for bind addresses explicitly set
(following bug reports in Debian for redis 4.0.9 and 5.0.1), it
also ignored a bunch of other errors like EPROTONOSUPPORT which was
requested in #3894, and also added EADDRNOTAVAIL (wasn't clear why).
This (ignoring EADDRNOTAVAIL) makes redis start successfully, even if a
certain network interface isn't up yet , in which case we rather redis
fail and will be re-tried when the NIC is up, see #7933.
However, it turns out that when IPv6 is disabled (supported but unused),
the error we're getting is EADDRNOTAVAIL. and in many systems the
default config file tries to bind to localhost for both v4 and v6 and
would like to silently ignore the error on v6 if disabled.
This means that we sometimes want to ignore EADDRNOTAVAIL and other times
we wanna fail.
So this commit changes these main things:
1. Ignore all the errors we ignore for both explicitly requested bind
address and a default implicit one.
2. Add a '-' prefix to allow EADDRNOTAVAIL be ignored (by default that's
different than the previous behavior).
3. Restructure that function in a more readable and maintainable way see
below.
4. Make the default behavior of listening to all achievable by setting
a bind config directive to * (previously only possible by omitting
it)
5. document everything.
The old structure of this function was that even if there are no bind
addresses requested, the loop that runs though the bind addresses runs
at least once anyway!
In that one iteration of the loop it binds to both v4 and v6 addresses,
handles errors for each of them separately, and then eventually at the
if-else chain, handles the error of the last bind attempt again!
This was very hard to read and very error prone to maintain, instead now
when the bind info is missing we create one with two entries, and run
the simple loop twice.
In case redis starts and find that THP is enabled ("always"), instead
of printing a log message, which might go unnoticed, redis will try to
disable it (just for the redis process).
Note: it looks like on self-bulit kernels THP is likely be set to "always" by default.
Some discuss about THP side effect on Linux:
according to http://www.antirez.com/news/84, we can see that
redis latency spikes are caused by linux kernel THP feature.
I have tested on E3-2650 v3, and found that 2M huge page costs
about 0.25ms to fix COW page fault.
Add a new config 'disable-thp', the recommended setting is 'yes',
(default) the redis tries to disable THP by prctl syscall. But
users who really want THP can set it to "no"
Thanks to Oran & Yossi for suggestions.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
Rather than blindly evicting until maxmemory limit is achieved, this
update adds a time limit to eviction. While over the maxmemory limit,
eviction will process before each command AND as a timeProc when no
commands are running.
This will reduce the latency impact on many cases, especially pathological
cases like massive used memory increase during dict rehashing.
There is a risk that some other edge cases (like massive pipelined use
of MGET) could cause Redis memory usage to keep growing despite the
eviction attempts, so a new maxmemory-eviction-tenacity config is
introduced to let users mitigate that.
1. default value of always-show-logo was not consistent with the default in the code
2. comment about cluster-replica-no-failover is wrong since we can only do manually failover upon replicas
3. improve description about always-show-logo
Add Linux kernel OOM killer control option.
This adds the ability to control the Linux OOM killer oom_score_adj
parameter for all Redis processes, depending on the process role (i.e.
master, replica, background child).
A oom-score-adj global boolean flag control this feature. In addition,
specific values can be configured using oom-score-adj-values if
additional tuning is required.
This makes it possible to add tests that generate assertions, and run
them with valgrind, making sure that there are no memory violations
prior to the assertion.
New config options:
- crash-log-enabled - can be disabled for cleaner core dumps
- crash-memcheck-enabled - useful for faster termination after a crash
- use-exit-on-panic - to be used by the test suite so that valgrind can
detect leaks and memory corruptions
Other changes:
- Crash log is printed even on system that dont HAVE_BACKTRACE, i.e. in
both SIGSEGV and assert / panic
- Assertion and panic won't print registers and code around EIP (which
was useless), but will do fast memory test (which may still indicate
that the assertion was due to memory corrpution)
I had to reshuffle code in order to re-use it, so i extracted come code
into function without actually doing any changes to the code:
- logServerInfo
- logModulesInfo
- doFastMemoryTest (with the exception of it being conditional)
- dumpCodeAroundEIP
changes to the crash report on segfault:
- logRegisters is called right after the stack trace (before info) done
just in order to have more re-usable code
- stack trace skips the first two items on the stack (the crash log and
signal handler functions)
Currently, there are several types of threads/child processes of a
redis server. Sometimes we need deeply optimise the performance of
redis, so we would like to isolate threads/processes.
There were some discussion about cpu affinity cases in the issue:
https://github.com/antirez/redis/issues/2863
So implement cpu affinity setting by redis.conf in this patch, then
we can config server_cpulist/bio_cpulist/aof_rewrite_cpulist/
bgsave_cpulist by cpu list.
Examples of cpulist in redis.conf:
server_cpulist 0-7:2 means cpu affinity 0,2,4,6
bio_cpulist 1,3 means cpu affinity 1,3
aof_rewrite_cpulist 8-11 means cpu affinity 8,9,10,11
bgsave_cpulist 1,10-11 means cpu affinity 1,10,11
Test on linux/freebsd, both work fine.
Signed-off-by: zhenwei pi <pizhenwei@bytedance.com>
While playing with ACLs I noticed that acllog-max-len wasn't in the redis.conf, but was a supported config.
This PR documents and adds the directive to the redis.conf file.
When using TLS with a Redis.conf file the line for TLS reading tls-cert-file redis.crt tls-key-file redis.key is interpreted as one complete directive. I am separating this on two separate lines to improve usability so users do not get the below error.
ubuntu@ip-172-31-29-250:~/redis-6.0-rc1$ ./src/redis-server redis.conf
*** FATAL CONFIG FILE ERROR ***
Reading the configuration file, at line 145
>>> 'tls-cert-file redis.crt tls-key-file redis.key'
wrong number of arguments
ubuntu@ip-172-31-29-250:~/redis-6.0-rc1$ vi redis.conf
ubuntu@ip-172-31-29-250:~/redis-6.0-rc1$ ./src/redis-server redis.conf
23085:C 04 Mar 2020 01:58:12.631 # oO0OoO0OoO0Oo Redis is starting oO0OoO0OoO0Oo
23085:C 04 Mar 2020 01:58:12.631 # Redis version=5.9.101, bits=64, commit=00000000, modified=0, pid=23085, just started
23085:C 04 Mar 2020 01:58:12.631 # Configuration loaded
23085:M 04 Mar 2020 01:58:12.632 * Increased maximum number of open files to 10032 (it was originally set to 1024).
Because "keymiss" is "special" compared to the rest of
the notifications (Trying not to break existing apps
using the 'A' format for notifications)
Also updated redis.conf and module.c docs
